Changed my screen name to Sharps45-70 from Fox18 to better match my CGN account. Hopefully no confusion there.
Gunman, what do you mean when you say "swivels"?
Ken, thanks for the advice. I will keep my eye out. This would have to be annealed then cut out with a dremel or something, correct?
You can cut the piece initially with a high-speed carbide cutter, making it somewhat oversize. Then you can anneal it and go at it with the file. You can also initially shape with a grinding wheel, as long as you don't let it get too hot. It also helps if your vise has a flat spot for hammering, as many of the trap parts have a bend to'em.
Regards
Ken
