Guys, I know it's a pretty classless model, but it's mine. I bought wood furniture to replace the Tenite. The stock screw's hiding at the bottom of that 9-1/4" deep hole in the butt. I've got a screwdriver that will reach, with a blade that will fit in the slot. But I can't find the slot with the blade. I shine the penlight in, get a mental picture of the position of the head (it's not on center down there), and the angle of the slot. Then I lower the blade and probe for the screw. So far, no luck. If I ever get it out I'll saw a cross slot in it before I reinstall. Please tell me there's a magic trick for getting the blade in the slot, before I saw the stock off and have done with it!
