The HVAC aluminum tape worked like a charm, Tamid. It has an adhesive on one side, requiring you to pull off a backing before applying. Clean the hook thoroughly with alcohol before putting it on, then take a 3/8" dowel or something else about that size and press the tape firmly into the hook. I cut mine oversize than trimmed it with an Exact knife. you can hardly see it there and it doesn't move. My tape is .003" thickness. Lasting good so far. Be sure to lube it well before putting barrels back on.
Credit to bushveld for the idea.
SRH
Last edited by Stan; 02/17/17 08:42 PM.
