Register Log In

doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com etching twist barrels

October
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Who's Online Now

0 members (), 572 guests, and 5 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics39,540

Posts562,549

Members14,592

Most Online9,918
Jul 28th, 2025

Print Thread

Re: etching twist barrels mikek #443306 05/03/16 10:34 AM
Joined: Mar 2002 Posts: 1,815 Likes: 4 Republic of Texas Stallones Sidelock
Stallones Sidelock Joined: Mar 2002 Posts: 1,815 Likes: 4 Republic of Texas	Mike, You do not need to etch BEFORE browning as the pattern witll come out as well with normal browning. I have tried Copper Sulfate and HCL/HNO3 BOTH AND CANNOT TELL THE DIFFERENCE IN FINAL PATTERNS AND RESULTS. The chemicals in your browning solution will do the "Etching" Last edited by Stallones; 05/03/16 02:12 PM.

Entire Thread
Subject	Posted By	Posted
etching twist barrels	mikek	05/03/16 01:06 PM
Re: etching twist barrels	OH Osthaus	05/03/16 02:26 PM
Re: etching twist barrels	Stallones	05/03/16 02:34 PM
Re: etching twist barrels	David Williamson	05/03/16 05:48 PM
Re: etching twist barrels	wannagohunting	05/03/16 05:56 PM
Re: etching twist barrels	Stallones	05/03/16 06:08 PM
Re: etching twist barrels	David Williamson	05/03/16 08:52 PM
Re: etching twist barrels	Ken61	05/04/16 01:50 PM
Re: etching twist barrels	gil russell	05/05/16 10:16 PM
Re: etching twist barrels	Ken61	05/08/16 03:46 PM
Re: etching twist barrels	PeteM	05/08/16 01:14 PM
Re: etching twist barrels	Ken61	05/08/16 04:01 PM
Re: etching twist barrels	Drew Hause	05/08/16 01:48 PM
Re: etching twist barrels	Drew Hause	05/08/16 05:43 PM

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack
Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.550s Queries: 17 (0.531s) Memory: 0.8137 MB (Peak: 1.9025 MB) Data Comp: Off Server Time: 2025-10-27 02:51:50 UTC
Valid HTML 5 and Valid CSS