Register Log In

doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com Drilling Identification and Date of Mfg.?

October
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Who's Online Now

2 members (Crockett, Geoff Roznak), 515 guests, and 5 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics39,500

Posts562,122

Members14,587

Most Online9,918
Jul 28th, 2025

Print Thread

Re: Drilling Identification and Date of Mfg.? ellenbr #435491 02/09/16 03:02 PM
Joined: Oct 2007 Posts: 525 Likes: 15 JAX,FL John E OP Sidelock
OP John E Sidelock Joined: Oct 2007 Posts: 525 Likes: 15 JAX,FL	Raimey, Buttplate is plain steel with light engraving at top, around screw, and screw heads. I include some pics of the locks. On the Right Hammer there is a striking face just above the plate to the inboard side. When the top lever is thrown left, a transfer bar is shifted right and allows the right Hammer to impact the lower firing pin for the rifle barrel. Thank you, John

Entire Thread
Subject	Posted By	Posted
Drilling Identification and Date of Mfg.?	John E	02/09/16 04:46 PM
Re: Drilling Identification and Date of Mfg.?	ellenbr	02/09/16 05:09 PM
Re: Drilling Identification and Date of Mfg.?	John E	02/09/16 07:02 PM
Re: Drilling Identification and Date of Mfg.?	Der Ami	02/09/16 06:16 PM
Re: Drilling Identification and Date of Mfg.?	John E	02/09/16 07:14 PM
Re: Drilling Identification and Date of Mfg.?	ellenbr	02/09/16 08:15 PM
Re: Drilling Identification and Date of Mfg.?	John E	02/09/16 11:04 PM
Re: Drilling Identification and Date of Mfg.?	2-piper	02/09/16 09:45 PM
Re: Drilling Identification and Date of Mfg.?	John E	02/09/16 11:11 PM
Re: Drilling Identification and Date of Mfg.?	ellenbr	02/09/16 11:27 PM
Re: Drilling Identification and Date of Mfg.?	2-piper	02/09/16 11:31 PM

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack
Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.565s Queries: 17 (0.512s) Memory: 0.8123 MB (Peak: 1.9026 MB) Data Comp: Off Server Time: 2025-10-11 02:25:52 UTC
Valid HTML 5 and Valid CSS