October
S M T W T F S
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31
Who's Online Now
0 members (), 606 guests, and 5 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums10
Topics39,488
Posts561,968
Members14,584
Most Online9,918
Jul 28th, 2025
Previous Thread
Next Thread
Print Thread
#419433 09/18/15 10:19 PM
Joined: Dec 2012
Posts: 34
Sidelock
***
OP Offline
Sidelock
***

Joined: Dec 2012
Posts: 34
Does anyone have a picture of the Hessian forend on a model 21?
I have read several descriptions, but cannot find a picture. If you could post a pic it would be most helpful.
Thanks

Joined: Mar 2011
Posts: 890
Sidelock
**
Offline
Sidelock
**

Joined: Mar 2011
Posts: 890
The photos below are copied from Ned Schwing's book on the 21.
General Omar Bradley's custom grade 20 ga. 21 with a Hession style forearm. Same length(more or less) as a field or skeet forearm, but much smaller across the radius; Hessions could be made as thin as manufacturing would allow and gripped the barrels tightly on the sides approximately even or slightly below the center line of the barrels. Approximately 9 to 9 1/2" in length...I have a skeet grade 12 with a 9" skeet forearm.



Joined: Feb 2009
Posts: 1,676
Likes: 180
Sidelock
**
Offline
Sidelock
**

Joined: Feb 2009
Posts: 1,676
Likes: 180

I recently ordered a "Baby Frame" from CSMC.
I chose a Hessian forend for both the 28 and .410 barrels.
The standard Beaver Tail appeared to have little or no taper. The Hessian just fit the Baby Frame perfectly.

There are not enough E's in sleek to describe it.


Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack

Order or request info | Other Useful Information

Updated every minute of everyday!


Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.080s Queries: 20 (0.049s) Memory: 0.7940 MB (Peak: 1.9022 MB) Data Comp: Off Server Time: 2025-10-04 07:27:54 UTC
Valid HTML 5 and Valid CSS