I believe the price now is 7.50 from TOTW. I always used a Mec Jr to reload my brass cases. If they took a pistol primer then the deprimer and prime tools for the Mec have to be made, or do it by hand. A 46 bushing can be used for powder drops with BP and even cut off for more powder. Because I used a Mec, for the 12ga brass, I use 10ga OP, OS, and cushiom wads for a tighter fit. This was with the extruded brass. With them I tried drilling out the primer pockets to use 209 primers but had a lot of trouble depriming them. The base was so thin the primer would stick up into the powder and get corroded they wouldn't come out. As it was more than a couple of years ago I'm not sure if I was using nitro or BP. Probably black seeing how I never did find a nitro load to work in the extruded cases.
Last edited by Paul Harm; 09/16/15 05:06 PM.
