Berrien,

Good and thanks for the report.

There are two ways to go.

One is to make chamber inserts and then make a new extractor to fit the new hull size and leave the inserts in semi-permanently.

Second it a pseudo shell (gaugemate), that the minor ammo fits and the whole affair is extracted each opening.

For the semi-permanent, a qualified machinist should be able to render a pair with a suitable chamber casting.

Then just make a new slave extractor.

14 to 20 would be wonderful smile

Mike



Last edited by skeettx; 07/25/15 05:11 PM.
USAF RET 1971-95 [Linked Image from jpgbox.com]