Originally Posted By: B. Graham
Is my source for parts ahfoxparts.com, or are there other options likely to have 20ga ejectors I should check with?

The same friend who gave this to me has a machine shop and many years of gunsmithing experience. I would think what might be simpler than fitting new ejectors might be to drill a hole in each ejector where the pin used to be, make new pins of the right length and diameter, and press fit them into the ejectors.


That could very well be a viable solution but a hands on examination would be required in order to make that determination
Jim

The 2nd Amendment IS an unalienable right.