Tom,
One last comment and I'll leave it alone. Loading shotgun for low pressure is very different then loading rifle. Do not deviate from the listed load. Don't change the primer, don't change the wad, don't change the hull and don't change the powder. Substituting one component can make a significant difference in the pressure.

As you know with a rifle, if you are out of CCI BR2's you can use Rem 9-1/2's or Fed LR without a big change. You may change POI a little but you still won't overpressure, and could short range hunt with it in a pinch. Not so when loading shotgun. Don't make assumptions.

Be safe and I hope this helps.
Ithaca1

Last edited by ithaca1; 04/12/15 09:17 PM.
Bill Johnson