My "new" Fox XE and BE with auto ejectors frequently get "stuck" on me at the range. Specifically, both guns upon firing and then opening, will have their ejector hammers sticking out making it impossible to close the action. I cannot manually push them back in but need to remove the forearm off of each and use a screwdriver to push back or reset the springs located on the inside of the forearm for the ejectors to recess. Both guns may fire a few more rounds before this problem repeats itself. Any idea why this happens AND what the fix is to it as well as cost? Is this an "a typical" or common problem with Foxes? Thought this problem was odd for both guns to have the same problem. As an aside and thought I would throw this into the mix, both guns were completely refinished/refurbished by the seller and my visit to the range was both their maiden voyage. Both guns are 12 gauge and I use 1 oz loads. Before returning the guns for inspection, I was hoping for a "head-up" by you folks in determing whats going on. Thanks for your help.
Bill
