I spread the crack, and then on underside I slip in a toothpick to keep it spread. I squeeze 24 hour epoxy into the crack with a disposable glue syringe (hobby store) and then force the epoxy in even deeper with compressed air,I next repeat the process. Finally, I pull out the toothpick squeeze the crack shut, wipe off any excess epoxy that squeezes out and the wrap it with a long piece of bicycle inner tube (or piece of rubber surgical tubing), and let it cure overnight. After I remove the tubing the next day I'll remove any excess epoxy with 0000 steel wool and then refinish the repaired area with Tru-Oil.
Last edited by Rockdoc; 09/22/14 05:57 PM.
