Stan I know I am wordy but please go back and read my post #366027.

The muzzles on all Parkers touched when they left the factory. There may be some exceptions but I have never seen one.

My specification of two-frame Parker set the distance of between the firing pins and thus between the centerlines of the bores at the breech.

So in my example the distance between the bores at the muzzle were identical on the 26" and the 32". And the distance between the bores at the breech were identical because I specified the two-frame gun.

So the angle between the 26" tubes (if straight) was different than the angle between the 32" tubes (if straight).

Last edited by AmarilloMike; 05/10/14 09:40 PM.

I am glad to be here.