Register Log In

doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com roll crimping loads/pressures

October
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Who's Online Now

2 members (Stanton Hillis, 1 invisible), 453 guests, and 4 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics39,519

Posts562,329

Members14,590

Most Online9,918
Jul 28th, 2025

Print Thread

Re: roll crimping loads/pressures Phunter #365512 05/02/14 10:10 AM
Joined: Mar 2005 Posts: 680 Flint Hills of Kansas TwiceBarrel Sidelock
TwiceBarrel Sidelock Joined: Mar 2005 Posts: 680 Flint Hills of Kansas	Yes although I work mostly with 16 gauge loads it has been my experience that the roll crimped loads will generate about 400-500 psi less chamber pressure than folded crimped loads with the same components. In any case the chamber pressure of roll crimped loads will not be higher than the published pressure listed for the 2 3/4 inch folded crimped load.

Entire Thread
Subject	Posted By	Posted
roll crimping loads/pressures	Phunter	05/02/14 04:24 AM
Re: roll crimping loads/pressures	bill schodlatz	05/02/14 02:06 PM
Re: roll crimping loads/pressures	Phunter	05/02/14 03:09 PM
Re: roll crimping loads/pressures	TwiceBarrel	05/02/14 02:10 PM
Re: roll crimping loads/pressures	Jerry V Lape	05/02/14 04:26 PM
Re: roll crimping loads/pressures	Phunter	05/02/14 07:08 PM
Re: roll crimping loads/pressures	David Williamson	05/02/14 04:50 PM
Re: roll crimping loads/pressures	Phunter	05/02/14 07:06 PM
Re: roll crimping loads/pressures	Joe Wood	05/02/14 07:41 PM
Re: roll crimping loads/pressures	oskar	05/02/14 11:02 PM
Re: roll crimping loads/pressures	Buzz	05/02/14 11:54 PM
Re: roll crimping loads/pressures	TwiceBarrel	05/03/14 12:17 AM

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack
Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.595s Queries: 17 (0.573s) Memory: 0.8101 MB (Peak: 1.9024 MB) Data Comp: Off Server Time: 2025-10-18 20:26:47 UTC
Valid HTML 5 and Valid CSS