Doverham,
About 20 years ago I had Jack Rowe bend a Perazzi to increase the amount of cast off. It came out perfectly & I know that Jack used the traditional hot oil method.
FWIW I also had a K 80 adjusted for cast off by Krieghoff @ Ottsville PA. using the adjustment to inletting method & that was done perfectly as well.
From my experiences I would assume that drop also could be adjusted by either of these methods w/o issues by a competent individual.
I should add here that any drop changes done by the adjustment to inletting method is going to be somewhat limited on throughbolt guns that have long top tangs.
Last edited by Brittany Man; 04/17/14 09:10 AM.
