+1 on the Super Glue filler, with walnut sawdust patted on. If you want to get really cute, you can steal a chip of wood from the stock's barrel channel, or throughbolt hole with a small gouge, then use the same gouge to chip out the bad spot, drop a bit of super glue on the spot, then put a sandwich baggie on your finger, and press the chip into the spot. If you match the grain direction, the repair will be invisible, after a scrape/sand down and finish. I use a 1/4" block carvers rounded gouge. If you forget the baggie, your finger will be part of the repair, and won't match walnut color too well(LOL).

Last edited by xs hedspace; 01/03/14 03:13 PM.
hippie redneck geezer