I am planning on ordering an AYA in the near future. But the last thing I want to do is have one made that is too long. How did you end up figuring out your LOP? I am regretting that I didn't do the fitting from a low position instead of the ready position.
I would recommend patience before ordering a custom gun with those proportions, particularly if you were measured with the gun pre-mounted and you are ordering a field gun. If that LOP is +/-1" too long, cutting it down later will also change the drops at heel and face. Use a slip on pad on one of your current guns to set up that LOP and shoot it for awhile low gun - a custom stock is a big investment so don't rush into it.
