doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com Soldering loose rib

May
S	M	T	W	T	F	S
					1	2
3	4	5	6	7	8	9
10	11	12	13	14	15	16
17	18	19	20	21	22	23
24	25	26	27	28	29	30
31

Who's Online Now

3 members (MattH, Geoff Roznak, Ted Schefelbein), 865 guests, and 4 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics40,108

Posts570,651

Members14,670

Most Online19,682
Mar 28th, 2026

Print Thread

Re: Soldering loose rib #3504 09/29/06 09:17 PM
Joined: Dec 2001 Posts: 7,569 Likes: 830 Colorado SKB Sidelock
SKB Sidelock Joined: Dec 2001 Posts: 7,569 Likes: 830 Colorado	Dont use the acid flux as it keeps oxidizing(sp?) after the clean up under the rib. Use rosin flux or another non-acid flux. Use wire in front and behind the area of the loose rib to keep things in place. Use wire and a wedge to push down the loose spot. You only need a little bit os solder. Heat the barrels and let the heat move toward the rib. Good luck, Steve www.bertramandco.com ACGG Pro Pope Leo is my war hero

Entire Thread
Subject	Posted By	Posted
Soldering loose rib	chopperlump	09/30/06 12:39 AM
Re: Soldering loose rib	SKB	09/30/06 01:17 AM
Re: Soldering loose rib	Ken Hurst	09/30/06 02:33 AM
Re: Soldering loose rib	HomelessjOe	09/30/06 04:56 AM
Re: Soldering loose rib	Doug Miller	09/30/06 05:14 AM
Re: Soldering loose rib	JimfromTrafalgar	09/30/06 09:14 AM
Re: Soldering loose rib	SKB	09/30/06 12:01 PM
Re: Soldering loose rib	HomelessjOe	09/30/06 12:18 PM
Re: Soldering loose rib	SKB	09/30/06 12:32 PM
Re: Soldering loose rib	HomelessjOe	09/30/06 12:47 PM
Re: Soldering loose rib	JimfromTrafalgar	09/30/06 01:41 PM
Re: Soldering loose rib	SKB	09/30/06 04:10 PM
Re: Soldering loose rib	JimfromTrafalgar	09/30/06 04:41 PM
Re: Soldering loose rib	Doug Miller	09/30/06 07:52 PM
Re: Soldering loose rib	chopperlump	09/30/06 08:13 PM
Re: Soldering loose rib	Doug Miller	10/01/06 12:59 AM
Re: Soldering loose rib	chopperlump	10/01/06 02:58 AM
Re: Soldering loose rib	HomelessjOe	10/01/06 09:30 AM
Re: Soldering loose rib	JimfromTrafalgar	10/01/06 11:02 AM
Re: Soldering loose rib	Anonymous	10/01/06 01:37 PM
Re: Soldering loose rib	SKB	10/01/06 01:49 PM
Re: Soldering loose rib	CASEY C._dup1	10/01/06 07:40 PM
Re: Soldering loose rib	doublegunhq	10/01/06 07:54 PM
Re: Soldering loose rib	Recoil Rob	10/01/06 08:15 PM
Re: Soldering loose rib	Hudson Valley Frank	10/01/06 10:24 PM
Re: Soldering loose rib	mark	10/02/06 04:17 AM
Re: Soldering loose rib	JimfromTrafalgar	10/02/06 08:21 AM
Re: Soldering loose rib	chopperlump	10/02/06 04:03 PM
Re: Soldering loose rib	chopperlump	10/02/06 04:04 PM
Re: Soldering loose rib	CASEY C._dup1	10/02/06 04:21 PM
Re: Soldering loose rib	JimfromTrafalgar	10/02/06 05:27 PM
Re: Soldering loose rib	chopperlump	10/03/06 02:10 AM
Re: Soldering loose rib	400 Nitro Express	10/03/06 09:14 AM
Re: Soldering loose rib	HomelessjOe	10/03/06 11:29 AM
Re: Soldering loose rib	JimfromTrafalgar	10/03/06 02:08 PM
Re: Soldering loose rib	Doug Miller	10/05/06 05:18 PM
Re: Soldering loose rib	HomelessjOe	10/05/06 06:50 PM
Re: Soldering loose rib	Doug Miller	10/05/06 07:47 PM
Re: Soldering loose rib	400 Nitro Express	10/05/06 08:52 PM
Re: Soldering loose rib	HomelessjOe	10/06/06 01:16 AM
Re: Soldering loose rib	doublegunhq	10/09/06 04:28 AM

Link Copied to Clipboard

Updated every minute of everyday!

Copyright (c) 1993 - 2026 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.420s Queries: 16 (0.400s) Memory: 0.8726 MB (Peak: 1.8992 MB) Data Comp: Off Server Time: 2026-05-31 01:57:06 UTC
Valid HTML 5 and Valid CSS