Register Log In

doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com Firing pin length

October
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Who's Online Now

1 members (1 invisible), 617 guests, and 3 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics39,504

Posts562,173

Members14,587

Most Online9,918
Jul 28th, 2025

Print Thread

Re: Firing pin length muchatrucha #329668 07/02/13 07:58 PM
Joined: Dec 2001 Posts: 7,313 Likes: 617 Colorado SKB Sidelock
SKB Sidelock Joined: Dec 2001 Posts: 7,313 Likes: 617 Colorado	.055" to .065" on the protrusion. Do the firing pins have rebounding springs? They usually are present when the pins are separate from strikers, but not always. Also if the gun has a way of indexing the pins like a slot in them with a screw to keep them from turning, sometimes a slightly exaggerated radius on the bottom side of the pin will help it slide free from the primer pocket. Firearms imports, consignments

Entire Thread
Subject	Posted By	Posted
Firing pin length	muchatrucha	07/02/13 07:03 PM
Re: Firing pin length	Der Ami	07/02/13 08:54 PM
Re: Firing pin length	SKB	07/02/13 11:58 PM
Re: Firing pin length	muchatrucha	07/03/13 12:08 AM
Re: Firing pin length	Gerald A. Mele	07/03/13 12:43 AM
Re: Firing pin length	muchatrucha	07/03/13 07:12 PM
Re: Firing pin length	2-piper	07/04/13 01:58 AM
Re: Firing pin length	gunman	07/04/13 06:40 PM
Re: Firing pin length	Kutter	07/04/13 06:51 PM
Re: Firing pin length	Mike Bonner	07/05/13 12:11 PM
Re: Firing pin length	muchatrucha	07/05/13 01:50 PM
Re: Firing pin length	CraigF	07/07/13 07:20 PM

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack
Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.712s Queries: 17 (0.681s) Memory: 0.8089 MB (Peak: 1.9025 MB) Data Comp: Off Server Time: 2025-10-13 11:49:02 UTC
Valid HTML 5 and Valid CSS