The the part on that connects the hammer spring to what ever makes the hammer work had broken and is gone.The triggers seem to be real close together maybe one is bent. I measured the inside of the barrels which by the way seem very good and came out with about .775. I tried to measure the thickness 9 inches from the breech with the brownells thickness guage and due to time I couldn come up with a figure that seemed right.Could it have read .185 . I'll have to re try I was in a rush.
The only thing I don't like about it is it must have about a two inch drop at the comb being a short Irishman like about a one inch.
