doublegunshop.com - home Forums General Discussion Classic & Custom Single Barreled Sporting Rifles @ doublegunshop.com shop built stock duplicator

It took quite a bit of work, but it was worth it! Based on a machine that mike Greene had built and utilizing a water cooled router motor.

Nice work.

Great work. Awsum. Whitey

Looks great, do you have a pattern for a high-wall pistol grip stock? I guess I should have asked first if you are going to do work for others.

I will do a few for others. It was built mostly for guns I stock in house. No hi wall pattern at the moment though. I usually build patterns for each job and accra-glass them in for best fit.

Very Nice SKB,
The design appears to have much in common with the original models sold by Don Allen.
In the late 1970's Don came to me and I built the first 2 machines for Don that were the basis of the duplicators sold by Dakota. (Don, lived in Northfield, Mn at the time) The very first one I built was sold to Al Lind (Don & Al were best friends). Last time I talked to Al, a couple years back, he was still using the machine. Which, I would stay is a testiment to the basic design concept of Don.
SKB, as you know it is no small task building one of these and let me say again, Nice, very nicely done.