Originally Posted By: PA24
2holer:

Yes, that gun above is a Fox Grade A from 1910 .....12 ga....your inletting cutouts are different probably because your gun is a Savage built gun from 1937 if I read what you posted correctly.....Savage made many changes after they bought out Fox.....

Here's an LC that I stripped, pinned, glassed and refinished....I usually put three horizontal pins in each stock, one front, middle and rear....makes for a very firm combo.......1914 12 ga. Trap Grade. I cover the pinning holes with sawdust when the epoxy is still soft...then sand, stain etc. after curing.....








Outstanding work. You should be pleased with yourself!!!

I'm struggling with a stock I was going to peg but that staple looks very interesting. That might be just the thing to solve one of my problems.