Register Log In

doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com Dickson Ejector Problem

October
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Who's Online Now

2 members (Jtplumb, 1 invisible), 675 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics39,504

Posts562,171

Members14,587

Most Online9,918
Jul 28th, 2025

Print Thread

Re: Dickson Ejector Problem Tim Carney #292988 09/11/12 02:06 PM
Joined: Sep 2011 Posts: 18 Scotland Pugwash Boxlock
Pugwash Boxlock Joined: Sep 2011 Posts: 18 Scotland	It sounds like the extractor may have got burred up by hitting the extractor stop hard.I would take it out and remove the burr then re harden and temper it to make sure it is hard enough for this to not happen again.Also check the extractor stop for burrs which may hold up the extractors and do the same to this. Last edited by Pugwash; 09/11/12 04:24 PM.

Entire Thread
Subject	Posted By	Posted
Dickson Ejector Problem	Tim Carney	09/10/12 02:23 PM
Re: Dickson Ejector Problem	gunman	09/10/12 07:29 PM
Re: Dickson Ejector Problem	Salopian	09/11/12 12:03 PM
Re: Dickson Ejector Problem	Tim Carney	09/11/12 02:34 PM
Re: Dickson Ejector Problem	Pugwash	09/11/12 06:06 PM
Re: Dickson Ejector Problem	Tim Carney	09/18/12 04:45 PM
Re: Dickson Ejector Problem	Salopian	09/18/12 07:01 PM
Re: Dickson Ejector Problem	justin	09/18/12 08:27 PM
Re: Dickson Ejector Problem	Bob Blair	09/18/12 11:08 PM
Re: Dickson Ejector Problem	justin	09/19/12 12:44 AM
Re: Dickson Ejector Problem	Bob Blair	09/19/12 04:53 AM
Re: Dickson Ejector Problem	justin	09/19/12 11:10 AM
Re: Dickson Ejector Problem	Salopian	09/19/12 12:53 PM
Re: Dickson Ejector Problem	justin	09/19/12 12:54 PM

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack
Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.496s Queries: 17 (0.471s) Memory: 0.8130 MB (Peak: 1.9018 MB) Data Comp: Off Server Time: 2025-10-13 06:23:40 UTC
Valid HTML 5 and Valid CSS