|
S |
M |
T |
W |
T |
F |
S |
|
|
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
|
|
3 members (Hammergun, 2 invisible),
415
guests, and
5
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums10
Topics38,610
Posts546,962
Members14,427
|
Most Online1,344 Apr 29th, 2024
|
|
|
Joined: Mar 2005
Posts: 709
Sidelock
|
OP
Sidelock
Joined: Mar 2005
Posts: 709 |
I don't know what process to use on the hook. I don't think TEG welder can get an smooth surface across the hook with out a lot of build up. I know there is a spray process but that is for fixing turbine shafts not little hooks. Any experience on this fix?
|
|
|
|
Joined: Jul 2012
Posts: 4,521 Likes: 221
Sidelock
|
Sidelock
Joined: Jul 2012
Posts: 4,521 Likes: 221 |
Pooch, Replace the hinge pin with a little larger one and refit the barrels, is the "school solution". Mike
|
|
|
|
Joined: Apr 2012
Posts: 63
Sidelock
|
Sidelock
Joined: Apr 2012
Posts: 63 |
Pooch Do you have Ellis Browns Book? he has a process useing a shim fitted into the lug. I have used it and like that method better than welding. Of course the pin must be round for that method to work.
Last edited by rgh25; 08/12/12 08:14 PM.
|
|
|
|
Joined: Mar 2005
Posts: 709
Sidelock
|
OP
Sidelock
Joined: Mar 2005
Posts: 709 |
I put a strips from an aluminum can in the hook as shims to measure thickness. They came out round, it looks like the wear is on the hook. I used a micrometer on the shims and a feeler gage on the face/breech they checked out at .012. I swore I would never shim. But given such a close tolerance, I believe the shim will give a more precise fit then either turning the pin or welding.
How did you attach your shim to the hook?
|
|
|
|
Joined: Jun 2008
Posts: 5,539 Likes: 170
Sidelock
|
Sidelock
Joined: Jun 2008
Posts: 5,539 Likes: 170 |
I do not attach the shim to the hook, I just fit the piece over the hinge pin and leave it there.
I usually do not break these guns down for transport, and use a full length case.
If the gun needs to be disassembled, I am careful to keep an eye on the shim, most of the time it remains on the hinge pin. Mike
USAF RET 1971-95
|
|
|
|
Joined: Jan 2002
Posts: 9,793 Likes: 769
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 9,793 Likes: 769 |
Mike has it right-It doesn't need to be attached. Pretty sure we aren't talking a Purdey here, and if it really bugs you, a more permanent method can be attempted in the future. I tried soldering feeler gauge stock for a shim one time, but, feeler gauge stock is ground and hardened, and it split when it got to temp. Might have been fine with plain old shim stock.
Best, Ted
|
|
|
|
Joined: Jan 2002
Posts: 881 Likes: 5
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 881 Likes: 5 |
For shim material try "Starrett Feeler Stock" made by the L S Starrett Co., Athol, Mass. It comes in all different thickness, can be cut to exact size with sissors and "glued" on the hook. I have it in .001" to .016". Bob Jurewicz
|
|
|
|
Joined: Jul 2008
Posts: 1,008
Sidelock
|
Sidelock
Joined: Jul 2008
Posts: 1,008 |
Is it possible to use something like Loktite to stick the shim on? If it would work it would hold the shim in place yet be removable if need be.
|
|
|
|
Joined: Mar 2005
Posts: 709
Sidelock
|
OP
Sidelock
Joined: Mar 2005
Posts: 709 |
Great video, describes my situation to a tee. In my youth I worked in a machine shop, I hope it's like riding a bicycle. Tempering that spring looks tough.
|
|
|
|
|
|