Sharps,
There is an article in WAIDMANNSHEIL, a couple issues ago, about "generic" 11mm cartridges.It describes 3 different ways to make 43 mauser cases, which are pretty expensive now. The best overall used 45-90 cases with the rim pushed forward to make the "A"base. Inyour case, use 45-70 which will be even cheaper.M-4s advice is right on, except you will have to size it down to 41 some way.If you have or can borrow 40-65 dies, they would make a good start. Now that I think about it,40-65 cases should be pretty avaliable now that it is used a good bit in BP Silhouette shooting.You might shorten 40-65 dies and use them for loading.
Mike.

Last edited by Der Ami; 07/06/12 03:47 PM.