J and R Engineering

Print Thread

Re: J and R Engineering rocky mtn bill #275442 04/17/12 10:47 PM
Joined: Feb 2002 Posts: 199 La Mesa CA John Mc Sidelock
John Mc Sidelock Joined: Feb 2002 Posts: 199 La Mesa CA	Once long ago and faraway I bought dembart checkering tool company. I was never able to get Joe's sharpening machine to work in a satisfactory manner. So I defered to Dorian for that service but as time went on It got to expensive and I ran out of parts to repair the old tools. I still peck away at the idea of a air powered tool or an electric tool with a more modern type of dental tool drive. But at as I approach the down hill side of the 70's I just cannot gen up much interest. THERE IS A GENTLEMAN IN TEXAS THAT HAS MMC TOOLS. I will try to find the contact number. I will post it in the next few days. Regards John McClure

Entire Thread
Subject	Posted By	Posted
J and R Engineering	rocky mtn bill	04/17/12 05:01 PM
Re: J and R Engineering	gasgunner	04/17/12 05:48 PM
Re: J and R Engineering	Alvin Linden	04/17/12 06:45 PM
Re: J and R Engineering	SDH-MT	04/17/12 06:47 PM
Re: J and R Engineering	Carpetsahib	04/17/12 08:52 PM
Re: J and R Engineering	SDH-MT	04/17/12 10:41 PM
Re: J and R Engineering	keith	04/18/12 01:16 AM
Re: J and R Engineering	RHD45	04/17/12 11:43 PM
Re: J and R Engineering	John Mc	04/18/12 02:47 AM
Re: J and R Engineering	Carpetsahib	04/18/12 03:24 AM
Re: J and R Engineering	J Scott McCash	04/19/12 01:51 AM
Re: J and R Engineering	DES/TSD	04/19/12 05:05 AM
Re: J and R Engineering	Carpetsahib	04/19/12 12:18 PM
Re: J and R Engineering	rocky mtn bill	04/19/12 12:35 PM
Re: J and R Engineering	Carpetsahib	04/25/12 07:25 PM
Re: J and R Engineering	DES/TSD	04/19/12 02:54 PM
Re: J and R Engineering	rocky mtn bill	05/01/12 11:19 PM
Re: J and R Engineering	Alvin Linden	05/02/12 02:42 AM
Re: J and R Engineering	Kutter	05/02/12 04:20 AM
Re: J and R Engineering	Dennis Potter	05/19/12 03:31 AM
Re: J and R Engineering	cgs	05/19/12 12:20 PM
Re: J and R Engineering	cgs	05/22/12 02:30 AM
Re: J and R Engineering	rocky mtn bill	05/19/12 03:48 PM
Re: J and R Engineering	rocky mtn bill	05/19/12 04:14 PM
Re: J and R Engineering	Alvin Linden	05/20/12 01:55 AM
Re: J and R Engineering	DES/TSD	05/22/12 07:21 AM
Re: J and R Engineering	Carpetsahib	05/23/12 03:57 AM
Re: J and R Engineering	rocky mtn bill	06/28/12 01:34 PM
Re: J and R Engineering	SDH-MT	06/28/12 05:26 PM
Re: J and R Engineering	Alvin Linden	06/28/12 10:26 PM
Re: J and R Engineering	cgs	08/31/12 10:24 PM
Re: J and R Engineering	DES/TSD	09/01/12 05:31 PM
Re: J and R Engineering	J.L.Propst	12/30/12 09:10 PM
Re: J and R Engineering	cgs	02/09/13 01:52 AM
Re: J and R Engineering	SR4759	04/29/13 03:01 AM
Re: J and R Engineering	Carpetsahib	05/02/13 01:55 AM
Re: J and R Engineering	Kutter	04/29/13 08:58 PM
Re: J and R Engineering	cct	06/28/13 05:11 PM

Link Copied to Clipboard

doublegunshop.com - home Forums General Discussion Classic & Custom Single Barreled Sporting Rifles @ doublegunshop.com J and R Engineering