There's a nice pic on p. 380 of L.C. Smith "The Legend Lives" showing the LC damascus brls. They referred to that pattern as "Fine Damascus-Figured Pattern Three Rod-67% Steel"
It was used on the Grade 3, Pigeon, and Grade 4 guns.
Sanderson Bros. Steel (used on the early Syracuse and later guns), Crucible Steel Co. (on post-1913 guns), and Halcomb Steel Co. (after 1905) were all in Syracuse.

Last edited by revdocdrew; 02/18/07 10:26 AM.
https://sites.google.com/a/damascusknowledge.com/www/home