doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com stock work

October
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Who's Online Now

0 members (), 1,059 guests, and 4 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics39,509

Posts562,204

Members14,588

Most Online9,918
Jul 28th, 2025

Print Thread

stock work #26198 02/16/07 12:15 PM
Joined: May 2006 Posts: 21 georgia leadsinger OP Junior Member
OP leadsinger Junior Member Joined: May 2006 Posts: 21 georgia	Another project, seems that's all I own. LC Smith FWE 16 ga. stock has been refinished and unfortunately sanded below the upper and lower tang. Odd that great care was taken around the lockplates. The stock has excellent grain and figure with no cracks. Is there an accepted way to build up the wood around the tang? thanks

Entire Thread
Subject	Posted By	Posted
stock work	leadsinger	02/16/07 04:15 PM
Re: stock work	craxon	02/16/07 04:57 PM

Link Copied to Clipboard

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.815s Queries: 16 (0.785s) Memory: 0.7872 MB (Peak: 1.9025 MB) Data Comp: Off Server Time: 2025-10-14 06:33:48 UTC
Valid HTML 5 and Valid CSS