|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
|
|
|
|
1
|
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
|
30
|
31
|
|
|
|
|
|
|
|
Forums10
Topics40,344
Posts574,147
Members14,700
| |
Most Online32,084
Jun 14th, 2026
|
|
|
|
Joined: Dec 2001
Posts: 3,604 Likes: 12
Sidelock
|
Sidelock
Joined: Dec 2001
Posts: 3,604 Likes: 12 |
RWTF, on the Ithaca choke numbering system, 4 = full. 3 would be improved modified.
You find some unusual choke combos on some of those guns. I once owned a Flues 16 that was 0/4--cyl/full. One of my current Flues is a 6 lb 7 oz 12ga that is 0/4.
Mike
|
|
|
|
|
Joined: Jan 2002
Posts: 10,530 Likes: 170
Sidelock
|
|
Sidelock
Joined: Jan 2002
Posts: 10,530 Likes: 170 |
flues are wonderful guns...keep your loads lite and your screws tight!
keep it simple and keep it safe...
|
|
|
|
|
Joined: Dec 2010
Posts: 1,228 Likes: 3
Sidelock
|
|
Sidelock
Joined: Dec 2010
Posts: 1,228 Likes: 3 |
Cylinder and full was actually a very sensible choke combination for an "all around gun" back when paper shells and wads were the norm. I've seen several guns with those chokes, and have one, a 10-bore Rem 1889 with one barrel marked "choke" (full) and the other not marked (cylinder). I was told it was made that way to shoot ball in open barrel. But I often use one skeet choke tube and one modified tube for upland hunting (full is TOO tight with modern shells).
|
|
|
|
|
Joined: Jul 2005
Posts: 7,066 Likes: 4
Sidelock
|
|
Sidelock
Joined: Jul 2005
Posts: 7,066 Likes: 4 |
RWTF, on the Ithaca choke numbering system, 4 = full. 3 would be improved modified.
You find some unusual choke combos on some of those guns. I once owned a Flues 16 that was 0/4--cyl/full. One of my current Flues is a 6 lb 7 oz 12ga that is 0/4. I have a Flues sixteen grade 4 that is choked 0/4. It weighs an ounce less than your twleve. Best, Mike
Last edited by AmarilloMike; 11/10/11 08:25 PM.
I am glad to be here.
|
|
|
|
|
Joined: Mar 2003
Posts: 578
Sidelock
|
|
Sidelock
Joined: Mar 2003
Posts: 578 |
Anyone know of a source for Flues parts, screws and springs? They are great old SxSs, but this one is in need of a lot of tender loving care that I'm looking at.
|
|
|
|
|
Joined: Mar 2003
Posts: 578
Sidelock
|
|
Sidelock
Joined: Mar 2003
Posts: 578 |
|
|
|
|
|
Joined: Dec 2001
Posts: 3,604 Likes: 12
Sidelock
|
|
Sidelock
Joined: Dec 2001
Posts: 3,604 Likes: 12 |
In addition to the very lightweight smallbores, Ithaca built some seriously husky Flues model doubles --
With some RST 2 7/8 inch 10-gauge shells, it should make a great Turkey and waterfowl gun. The three Flues I have owned have been 12's. 6lb 7oz (28" barrels) 7lb 13 oz (30" barrels) 8lb 9oz (30" barrels)
Mike
|
|
|
|
|
|
|
