A friend built some long gun storage much like map drawers. I think they were about 60 inches wide and stacked about 10 high. He got good hardware so he could pull out the drawers when full of guns and also got a very strong plywood which he said originated in Russia. All looked nice and functioned well, but----------apparently there were some vapors from the plywood glue and a few weeks later he discovered his pristine doubles with lots of case color now had the case color missing on the "contact" side with the drawers. As I remember he had a couple of dozen doubles ruined in that way. Be careful what glues you get close to your guns.
Last edited by Daryl Hallquist; 09/04/11 06:08 PM.
