Thanks guys. This is a new target gun that came with the maker's standard recoil pad which was obviously set up for pre-mounted shooting. I shoot low mount so we are not simpatico.
I checked out the CSMC "treatment" option for Silvers pads:
1. After installation of the pad, buff it with Vaseline to add a sheen
2. Coat it with varnish, tru-oil, and shellac and let dry. This will preserve the sheen.
Do you think this means equal parts varnish, tru-oil and shellac or three separate coats?
The duct tape would look at little out of place on this gun, but it makes me wonder if I could buy some slick material and glue it to the pad.
