|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
|
1
|
2
|
3
|
4
|
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
|
6 members (MattH, Wild Skies, R. Glenz, David Williamson, dblgnfix, SKB),
1,151
guests, and
5
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums10
Topics39,520
Posts562,356
Members14,590
| |
Most Online9,918
Jul 28th, 2025
|
|
|
|
Joined: Jan 2002
Posts: 110
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 110 |
Try this site. http://www.thistothat.com/ Lots of adhesive information there. Regards, Neil
|
|
|
|
|
Joined: Feb 2003
Posts: 4,109 Likes: 78
Sidelock
|
|
Sidelock
Joined: Feb 2003
Posts: 4,109 Likes: 78 |
No luck Cameron. The part on this one is a casting and has a round hole where yours has a rectangular one.
I'd be inclined to fire up the dremel tool and drill small holes for screws.
"The price of good shotgunnery is constant practice" - Fred Kimble
|
|
|
|
|
Joined: Dec 2004
Posts: 997 Likes: 7
Sidelock
|
|
OP
Sidelock
Joined: Dec 2004
Posts: 997 Likes: 7 |
Thanks Shotgun for your efforts!
I'm thinking for the time being, I'll clamp the two pieces together, and use some epoxy to build up the area on the outside where the two broken seams are. After that putting in a couple small screws may be a good way to go.
I'd like to get the machine through the winter trap/skeet season. At that point a replacement might be in order.
Cameron Hughes
|
|
|
|
|
Joined: Oct 2003
Posts: 502
Sidelock
|
|
Sidelock
Joined: Oct 2003
Posts: 502 |
Hi Cameron:
You may wish to attempt to weld it. I have done plastic welding with a hot air gun with a filler rod. I have also done plastic welding with a hot iron and filler rod. Both methods workded very well!
After welding, one may dress the weld to fit or to just look nice. Of course your filler should be the same type of material as the base material. Some times one may take material from a part of the device that does not need it.
The idea of placing small pins or screws prior to welding may be very helpful.
Good luck,
Franchi
|
|
|
|
|
|
|
