doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com Pad fit

October
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Who's Online Now

0 members (), 507 guests, and 5 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics39,529

Posts562,466

Members14,592

Most Online9,918
Jul 28th, 2025

Print Thread

Re: Pad fit kstt #200131 08/20/10 07:47 AM
Joined: Jan 2005 Posts: 80 Connecticut, USA RJM Sidelock
RJM Sidelock Joined: Jan 2005 Posts: 80 Connecticut, USA	Put the pad on a sheet of sand paper & move in a figure 8 motion to flatten that surface. I square the stock with a sanding disk on a radial arm saw, the stock being held in a sled/fixture. Both surfaces need to be flat. Regards, Ron

Entire Thread
Subject	Posted By	Posted
Pad fit	kstt	08/20/10 11:03 AM
Re: Pad fit	RJM	08/20/10 11:47 AM
Re: Pad fit	gunman	08/20/10 03:15 PM
Re: Pad fit	eightbore	08/20/10 04:00 PM
Re: Pad fit	Genelang	08/20/10 08:10 PM
Re: Pad fit	Jim Legg	08/21/10 03:50 AM

Link Copied to Clipboard

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.536s Queries: 17 (0.510s) Memory: 0.7969 MB (Peak: 1.9025 MB) Data Comp: Off Server Time: 2025-10-24 08:23:48 UTC
Valid HTML 5 and Valid CSS