Well let's see now we checked the Gaugemate 28ga adapter in the 16ga for pressure using Remington shells & measured "After" the forcing cone. We checked another adapter in a 12ga using Winchester shells with pressure taken "Prior" to the forcing cone.

With all due respect to Mr Bell he may as well have checked which would give the most milk, A Guernsey Cow or a Hampshire Sow. That test tells us a big fat absolute "0".

It has been well known for over a century that to insure that max pressure is recorded the sensor needed to be placed at about 1.0" from the breech. There was a reason that Gunmakers put the most metal "Over The Chamber".


Last edited by 2-piper; 10/12/09 08:40 PM.
Miller/TN
I Didn't Say Everything I Said, Yogi Berra