MC;
The Herter dies had a 1¼-18 thread. Their #3, #81 & #234 presses would accomadate them. The #3 was a C-press, the #81 A C-type put with two rams & stations. I am not certain if the stations were located far enough apart to handle two of the big shotshell dies or not. The #234 was a six station turrent & normally came with only one station having the large thread. It could be had on special order with alternate holes (3) threaded for the shotshell dies. I do not recall the models of the Lachmiller presses with this thread but neither has been available for some time now. RCBS did, & may still offer a press having a large thread but it was different than this one. The Herter presses show up on E-Bay quite often & the single station #3 often sells rather cheap, but shipping is high, they are heavy presses of all cast iron. That #3 would resize a GI .30-06 brass into a 7x57 Mauser case with one stroke & not break a sweat.
