2-piper,
You are correct. I was having my morning coffee and was not quite revved up yet. Thanks.
Revdocdrew,
Now I am really confused. When you subract those two numbers you get .004 which is what the dealer measured in both barrels. Only the right barrels is marked that way. The other just says 14.0 mm. Remeasuring as careful as I can I come up with .555 and .554 still with cylinder choke. The dealer had .004 for both chokes on the tag and measured .005 on both in front of me. He seemed to think they were only 1/4" to 1/2" long and seemed to agree the barrels may have been cut. My three ball Stan Baker gauge may not pick it up if it is only 1/4 inch long but that does not make sense to me either. Huh?
