On my 7X57R I did shoot some light reloads in 7X57 brass to get cases fireformed to chamber, then loaded the fireformed 7X57 cases with same die settings as 7X57R (adjusted to not reset shoulder back to factory location for 7X57). HOWEVER, when I tried to chamber these fireformed, rimless "7X57R" cases in a 7X57, they would not chamber until I set the shoulder back fully. Sure, this might well just be the specific chamber of my 7X57R.

Niklas

Last edited by NiklasP; 11/21/08 10:13 PM.