Here's a good site. Some personal tips I've developed for loading them on MEC loaders are to get a 10 ga. wad starter. Lets the 12 ga. fiber wads come through easier. On the Grabber shot tube/wad seater, cut off the wasp-waisted bottom end of the tube. It seats the fiber wads better. If you're using black powder, the Universal Charge Bar(adjustable) is the only way to get a large enough chamber for 75-90 grains of BP. I know the CYA police say to not use a sliding bar to dump BP. I'm not, either, but I've done it for years, myself.
I just realized I forgot to paste the site I referred to. Thanks to JC for doing it.
Last edited by Jim Legg; 11/04/08 09:48 AM.
