Take it to a gunsmith who knows doubles and have him take it apart to clean and freshly lube it. Spraying anything through holes is not the way to clean a gun. Sorry, Larry.
By "take it apart", I meant to remove the buttstock and clean it thoroughly. I would not take it apart, bit by bit, unless it was very old and full of wax and gum.
Trying to "clean" by spraying "gunsmith-in-a-can" into the firing pin holes is asking for trouble. Oil and solvent soaking into the stock head and eventually the parts will be gummier than before because nothing was really cleaned. It's hard to imagine hitting ANY trouble spots with whatever spray can get past the firing pins.
Last edited by Jim Legg; 07/16/08 12:47 PM.
