Had to take my Ithaca in for a little weld, drill & Tap repair. the screw that goes through the stock was stripped & the threaded hole on the bootom was out of round & the threads were about gone.
Should be ready later this week. Then i Can put the stock back on & start working on where the top of the wrist was broke. both sides broke & you can see where the screw had worked loose & Allowed the tang to slide down the stock a little bit gouging it.! Also Had to drill & Replace wood in the center of the stock becouse it was severly egg shaped also!
Will try & post pics when I get the action back.
