|
S |
M |
T |
W |
T |
F |
S |
|
|
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
|
|
1 members (btbell),
305
guests, and
5
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums10
Topics38,615
Posts547,014
Members14,427
|
Most Online1,344 Apr 29th, 2024
|
|
|
Joined: Feb 2002
Posts: 211
Sidelock
|
Sidelock
Joined: Feb 2002
Posts: 211 |
I was at Ernies talking to one of the guys at RST's tent and asked why no 10 gauge. Was told there were no wads available, but they had all the other components. I don't know whose wad they use but I load 10 gauge and am getting low on Remington SP 10's. The only 10 gauge wads available right now is card and fiber. Heard that Remington will be making more Sp 10's after some of their shortages are taken care of, but who knows when. So I e-mailed Claybuster and asked them to consider making an SP 10 clone. I got a nice reply thanking me for my interest but they are not adding any new items to their product line however they are adding my request to the list. Wonder what would happen if RST contacted them??
Jack K
|
|
|
|
Joined: Feb 2002
Posts: 1,564 Likes: 23
Sidelock
|
Sidelock
Joined: Feb 2002
Posts: 1,564 Likes: 23 |
RST limited the shells to 3 boxes per person at the NE SXS until the last day and on that day they would sell you a flat. Prices were $20 per box and no discount for a flat. Everything was in good supply except for 16 gauge 2.5" as they are loaded with the same powder as 12 gauge. The only 16 gauge available was the 7/8 oz load in size 7.5. That's stiff, but the reality is unless you reload you are going to pay it if you want to shoot short chambered guns. PS. I worked the Fox booth this year per the norm. Lots of folks were talking about extending the chambers on the short chambered guns so they could shoot factory 2 3/4" loads. I spoke to one dealer there who measured some Fox guns that had had their chambers extended and they in his opinion were marginal to shoot anything (including RST) out of. In front of the chambers the readings were less then .009. The biggest problems were with gun that had lighter weight barrels installed at the factory (example 4 barrel weight Foxes). Bottom line is if you going to get a classic with the barrel chambers extended get them measured before plucking down your cash. Do you mean .090 not .009 or did the dealer really say .009? Also where in front of the chambers. start or end of the forcing one, how long was the cone? Not enough infor. to make a logical conclusion. Sorry, you are correct. In front of the lengthened chambers measurements were in the .085 range.
foxes rule
|
|
|
|
Joined: Feb 2006
Posts: 1,601 Likes: 14
Sidelock
|
Sidelock
Joined: Feb 2006
Posts: 1,601 Likes: 14 |
.085" is plenty of wall thickness at the juncture of the chamber/cone IMO.
I have a 16 gauge Parker with Damascus barrels that Dr. Gaddy measured at .067" and .065" and he pronounced them safe to shoot under 7,500 psi loads... and I have shot it a lot.
|
|
|
|
Joined: Feb 2002
Posts: 1,564 Likes: 23
Sidelock
|
Sidelock
Joined: Feb 2002
Posts: 1,564 Likes: 23 |
.085" is plenty of wall thickness at the juncture of the chamber/cone IMO.
I have a 16 gauge Parker with Damascus barrels that Dr. Gaddy measured at .067" and .065" and he pronounced them safe to shoot under 7,500 psi loads... and I have shot it a lot. I don't believe the issue is for those who routinely shoot and reload their own ammo unless its an accidental double charge (seen those). However, one pretty well known fellow who does this type work has seen two blown barrels in front of the chambers on Fox 16 gauges after they were extended to 2 3/4". Both of those barrels were in the .085 range. Who knows what they were fed, but accidents do happen. The question will always be when that gun is moved on at some point will someone measure the chambers and see they are 2 3/4" and stuff whatever in there and pull the trigger.
foxes rule
|
|
|
|
|
|