doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com Charles Daly - Lindner? Date?

Yes, perfect sense as that is Scott's serialization & one can date it by that.

Cheers,

Raimey
rse

Ok, that begs the next question. Is it reasonable to think 707 is an earlier gun, assembled from a Scott parts kit, but 441 is later, given the different action, possibly one sourced in Suhl, and 441 is part of the serial numbers used by Georg after they had used all the Scott parts kits? Any idea of the approx date of mfg. for 707?

Thanks
Ken

http://doublegunshop.com/forums/ubbthreads.php?ubb=showflat&Number=404463&page=all

http://www.doublegunshop.com/forums/ubbthreads.php?ubb=showflat&Number=235106&page=1

http://www.doublegunshop.com/forums/ubbthreads.php?ubb=showflat&Number=311361&page=25

1871/1872 Ken61.

Cheers,

Raimey
rse

http://www.doublegunshop.com/forums/ubbthreads.php?ubb=showflat&Number=236260&page=16

Above is the page for which I was searching.

More images of tunes' Charles Daly with the Golcher lifter, which only differs by a couple hundred in the serial number vs. Joe Wood's:

Joe's Lock above

Looks to be almost identical locks=same lockmaker???







Joe Wood's W&C Scott and Charles Daly:






Charles Daly 10 Bore 162
Charles Daly 10 bore 601 has CFW initials
Charles Daly 10 bore 796 with Jones Underlever was made in late 1871 or in 1872
C.F. Schilling St. Louis 953 with AS on left tube with AH in Action well
Charles Daly 10 bore 1033 has wide forend latch Deeley & Edge but not Lindner marks
Charles Daly 1092 with RS on tube and AR in action well
Thomas L. Golcher 1120 2 barrel set(No. 134?) - McPhail
Charles Daly 20 bore 125x possibly with English preliminary
Charles Daly 1366 has AS
Charles Green Rochester NY has AS
Charles Daly 10 bore 1569 has KS and no Lindner marks
Thomas Golcher 1662 no initials but H.A. Lindner stamps
Thomas Golcher 1741 has RS and H.A. Lindner stamps
Charles Daly 10 bore 1846 has H.A. Lindner's stamps
Charles Daly 10 bore 2015 has KS & H.A. Lindner stamps
Thomas L. Golcher - 212x with H.A. Lindner stamps
George W. Golcher 2187 no initials but H.A. Lindner stamps
Thomas Golcher 2403 has KS and H.A. Lindner stamps
Joseph Jakob 2962 has H.A. Lindner stamps A&D Brevete #1152
Joseph Jakob 3246 has H.A. Lindner stamps
Joseph Jakob 3241? in calibre 40-82
Charles Overbaugh 3474 has RS and H.A. Lindner stamps


Cheers,

Raimey
rse

I guess someone should take the time & put all of this together?


Cheers,

Raimey
rse

Ken61:

Can you pull the locks on the example #441 of which you are a custodian?

Cheers,

Raimey
rse

441 or 707? 707 looks to have the Scott pin pattern. 441 does not.

That's the thread I've been looking for...

Are there certain tools for the screws, I have tried all my screwdrivers, and they are in their pretty tight. Thanks

Don't use regular screwdrivers, you'll bugger the screws. Hollow ground screwdrivers that fit exactly is the only way to avoid this, as the slots are thin. You can also file your own. Regular Gun Screwdrivers are also unsuitable, but Brownell's sells a "Thin Bit" set.

http://finegunmaking.com/page36/page16/page16.html

Thanks Ken...once again. Good info you all are digging up.