doublegunshop.com - home Forums General Discussion Classic & Custom Single Barreled Sporting Rifles @ doublegunshop.com Parker-Hale Cocking piece sight pictures wanted

Does anyone have some really good pictures of a Parker-Hale
Cocking piece sight that they could post up on this thread?
And if so would you please post them. I bought some pieces
of Parker-Hale sight and would like to machine a base to fit
a Mauser cocking piece. Or better yet, if I could get the dimensions for a base, that would be super.

GOOGLE ...."Sportarget No.1 Bolt Peep" THEN CLICK ON "IMAGES" HOT BUTTON AT TOP OF PAGE TO RIGHT OF "SEARCH" BUTTON! PLENTY THERE Good Luck HTH

Not parker hale but on my .404 mauser

Here is a link to very informative post with lots of photos.


http://forums.nitroexpress.com/showflat.php?Cat=0&Number=151111&an=0&page=1#Post151111

Mark

Thanks for all the contributions, the google image search didn't turn up much. The nitroexpress posts were great, they really were.
But, I was really looking for a good pictures of original Parker-Hale cocking piece for a Mauser cocking piece. The one on the Mauser in the nitroexpress thread is a modification of another Parker-Hale sight. What I was really hoping for, would be pictures like Mike Harrel posted, one's that show things clearly enough
that I could, knowing the diameter of the cocking piece, make measurements from. I promise that I will be a good citizen of this board and make available a detailed procedure for making a base.

Thanks for the great pictures, they are just what I need
to get approximate dimensions. I am going to work on
these this summer.