doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com Lefever (Ithica) Nitro Special

Perfect! Thanks,Rob.

BTW, note how each part comes out even if the difference seem minuscule. For the life of me I cannot remember which part (actually pair of parts, one on each side) is not symmetrical, I reassembled everything with them backwards and the gun would not cock. Had to tear it down and do it right. I may have had the cocking rods in upside down or something, it's been a few years now.

Also remember which parts come from which side and keep them together, don't go mixing rights with lefts.

Good luck.

yup- i've done the same sort of thing. got in the habit of using a digital camera as i go.. sort of making my own Radocy
guide.

I've enjoyed this. I like to tinker and always end up with extra parts. If I took it apart, I'd have a shoe box full of parts headed to the gunsmith. I know my limitations.

Done. 4 hours, complete dissassembly and detail clean, lube, and re-assemble. Cocks with about half the effort minus 80 years of congealed dirt and grease. Peachy gun, $29.00 new at the hardware store back when. Thanks to all.