It came in today, Simpsons did not list actual model number but she turned out to be a Model 100. That one has a doll's head barrel extension.
I cleaned/ degreased using a spray brake cleaner to cut old dried lubes and relubed. She locks up tight as a bank vault, no movement at all. Top lever stops just barely to the right of center when locked. There is a little perception of side movement when open but rather minor.
The only bad thing is a bit of minor pitting in front of the chambers. I'll just keep them oiled/greased with a rust inhibiting product to stop any further progression.
I checked the serial number on the Husqvarna historical site and determined it was made in 1910, 99 years old.
Now to get out and try it.
