Register Log In

doublegunshop.com - home Forums General Discussion DIY Gunsmithing @ doublegunshop.com Polishing lengthened forcing cones

April
S	M	T	W	T	F	S
	1	2	3	4	5	6
7	8	9	10	11	12	13
14	15	16	17	18	19	20
21	22	23	24	25	26	27
28	29	30

Who's Online Now

7 members (Ken Nelson, ClapperZapper, Chad Linder, 3 invisible), 1,001 guests, and 7 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics38,481

Posts545,237

Members14,410

Most Online1,335
Apr 27th, 2024

Print Thread

Polishing lengthened forcing cones #553777 08/31/19 04:35 PM
Joined: Dec 2001 Posts: 1,000 Likes: 65 Western Wisconsin DoubleTake OP Sidelock
OP DoubleTake Sidelock Joined: Dec 2001 Posts: 1,000 Likes: 65 Western Wisconsin	I picked up a used AyA #2 16 in real nice condition and I see the dark bands ahead of the chambers that I assume were where the forcing cones were lengthened. Looks like a plastic trap and areas that would be more vulnerable able to rust. Can these be polished to the same level as the rest of the bores? If so I'm not sure I'm up to this on a gun this nice.

Entire Thread
Subject	Posted By	Posted
Polishing lengthened forcing cones	DoubleTake	08/31/19 08:35 PM
Re: Polishing lengthened forcing cones	bill schodlatz	09/04/19 12:07 AM
Re: Polishing lengthened forcing cones	Stanton Hillis	09/04/19 12:22 AM
Re: Polishing lengthened forcing cones	BCole	09/04/19 01:37 AM
Re: Polishing lengthened forcing cones	SKB	09/04/19 01:51 AM
Re: Polishing lengthened forcing cones	bill schodlatz	09/04/19 02:31 PM
Re: Polishing lengthened forcing cones	Chuckster	09/05/19 01:54 AM
Re: Polishing lengthened forcing cones	DoubleTake	09/05/19 11:48 AM
Re: Polishing lengthened forcing cones	Stanton Hillis	09/08/19 01:27 PM
Re: Polishing lengthened forcing cones	keith	09/09/19 08:46 PM

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack
Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.381s Queries: 17 (0.356s) Memory: 0.8069 MB (Peak: 1.8994 MB) Data Comp: Off Server Time: 2024-04-29 15:15:49 UTC
Valid HTML 5 and Valid CSS