Register Log In

doublegunshop.com - home Forums General Discussion DIY Gunsmithing @ doublegunshop.com Action too tight after coloring

April
S	M	T	W	T	F	S
	1	2	3	4	5	6
7	8	9	10	11	12	13
14	15	16	17	18	19	20
21	22	23	24	25	26	27
28	29	30

Who's Online Now

10 members (Kip, battle, Jem Finch, Hammergun, Marplot, Lloyd3, 1 invisible), 373 guests, and 6 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics38,443

Posts544,791

Members14,405

Most Online1,258
Mar 29th, 2024

Print Thread

Action too tight after coloring #541026 03/14/19 12:05 AM
Joined: Aug 2013 Posts: 973 Likes: 23 Durham NC Bill Graham OP Sidelock
OP Bill Graham Sidelock Joined: Aug 2013 Posts: 973 Likes: 23 Durham NC	The nose of the action seems too tight on those 1894 after color casing. The joint check installed just fine, and it�s nose pushes on the extractor as it should, but the barrel hook will not descend far enough to wrap around the hinge pin to allow the barrel to close. I braced the tangs, but I didn�t wedge anything in the gap between the water tables. What now?

Entire Thread
Subject	Posted By	Posted
Action too tight after coloring	Bill Graham	03/14/19 04:05 AM
Re: Action too tight after coloring	Der Ami	03/14/19 01:18 PM
Re: Action too tight after coloring	Bill Graham	03/14/19 01:41 PM
Re: Action too tight after coloring	Bill Graham	03/14/19 03:51 PM
Re: Action too tight after coloring	Der Ami	03/14/19 09:19 PM
Re: Action too tight after coloring	Bill Graham	03/15/19 05:26 AM

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack
Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.366s Queries: 17 (0.346s) Memory: 0.7988 MB (Peak: 1.8993 MB) Data Comp: Off Server Time: 2024-04-18 22:25:22 UTC
Valid HTML 5 and Valid CSS