doublegunshop.com - home Forums General Discussion DIY Gunsmithing @ doublegunshop.com Chamber Length Gauging

May
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Who's Online Now

4 members (R Reynolds, Der Ami, Borderbill, smlekid), 1,066 guests, and 5 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics38,514

Posts545,670

Members14,419

Most Online1,344
Apr 29th, 2024

Print Thread

Re: Chamber Length Gauging fallschirmjaeger #519415 07/27/18 11:48 AM
Joined: Jan 2009 Posts: 389 Likes: 11 Canada Colonial Sidelock
Colonial Sidelock Joined: Jan 2009 Posts: 389 Likes: 11 Canada	So.... If I had a 2 1/2 inch gun with oversize chambers, and a "proper" gauge showed it as 2 3/4, would 2 3/4 inch shells be OK?? Dumb, but learning...Prof Em, BSc(ME), CAE (FYI)

Entire Thread
Subject	Posted By	Posted
Chamber Length Gauging	fallschirmjaeger	07/22/18 11:37 PM
Re: Chamber Length Gauging	Geo. Newbern	07/22/18 11:41 PM
Re: Chamber Length Gauging	Mark II	07/23/18 01:15 PM
Re: Chamber Length Gauging	moses	07/23/18 09:54 PM
Re: Chamber Length Gauging	keith	07/27/18 09:47 PM
Re: Chamber Length Gauging	PeterMichael	07/23/18 10:08 PM
Re: Chamber Length Gauging	fallschirmjaeger	07/24/18 12:25 PM
Re: Chamber Length Gauging	Geo. Newbern	07/24/18 03:54 PM
Re: Chamber Length Gauging	fallschirmjaeger	07/24/18 11:29 PM
Re: Chamber Length Gauging	Ghostrider	07/25/18 09:25 AM
Re: Chamber Length Gauging	Stanton Hillis	07/27/18 10:31 AM
Re: Chamber Length Gauging	Salopian	07/26/18 11:03 AM
Re: Chamber Length Gauging	Colonial	07/27/18 03:48 PM
Re: Chamber Length Gauging	Der Ami	07/27/18 04:26 PM
Re: Chamber Length Gauging	moses	07/27/18 11:18 PM
Re: Chamber Length Gauging	Ghostrider	07/28/18 03:45 AM
Re: Chamber Length Gauging	keith	07/28/18 09:20 PM
Re: Chamber Length Gauging	SKB	07/28/18 11:42 AM
Re: Chamber Length Gauging	mark	07/28/18 12:51 PM
Re: Chamber Length Gauging	eightbore	07/28/18 11:58 PM
Re: Chamber Length Gauging	Rick	08/11/18 02:58 AM
Re: Chamber Length Gauging	Gary Rennles	08/13/18 01:12 AM

Link Copied to Clipboard

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.389s Queries: 17 (0.368s) Memory: 0.8340 MB (Peak: 1.8994 MB) Data Comp: Off Server Time: 2024-05-10 13:16:06 UTC
Valid HTML 5 and Valid CSS