Register Log In

doublegunshop.com - home Forums General Discussion DIY Gunsmithing @ doublegunshop.com Timing wood screws

May
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Who's Online Now

4 members (dblgnfix, Wild Skies, Roundsworth, bsteele), 1,126 guests, and 4 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics38,513

Posts545,667

Members14,419

Most Online1,344
Apr 29th, 2024

Print Thread

Re: Timing wood screws Bill Graham #507665 03/07/18 09:22 PM
Joined: Feb 2008 Posts: 11,345 Likes: 391 keith Sidelock
keith Sidelock Joined: Feb 2008 Posts: 11,345 Likes: 391	Another 1/2 turn of the screw... removing additional wood by sanding or scraping if necessary to reach that point without over-tightening and cracking the grip cap. A cheap and dirty way would be to shim under the head of the screw with teflon pipe tape or very thin conical washers made of thin sheet copper or aluminum. A true sign of mental illness is any gun owner who would vote for an Anti-Gunner like Joe Biden.

Entire Thread
Subject	Posted By	Posted
Timing wood screws	Bill Graham	03/08/18 12:01 AM
Re: Timing wood screws	keith	03/08/18 01:22 AM
Re: Timing wood screws	Bill Graham	03/08/18 04:07 AM
Re: Timing wood screws	damascus	03/08/18 10:21 AM
Re: Timing wood screws	Bill Graham	03/08/18 02:53 PM
Re: Timing wood screws	B. Dudley	03/08/18 06:32 PM
Re: Timing wood screws	67galaxie	03/09/18 05:34 AM
Re: Timing wood screws	Der Ami	03/09/18 03:32 PM

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack
Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.410s Queries: 18 (0.392s) Memory: 0.8027 MB (Peak: 1.8993 MB) Data Comp: Off Server Time: 2024-05-10 11:10:37 UTC
Valid HTML 5 and Valid CSS