Keith,

I will be slugging the bore and casting the chambers and throats as soon as I get back to the US.
I also will be making a new striker for the left side, that one is a poor replacement.
The one on the right is taller and more dome shaped and I believe it to be original.
The one on the left also does not sit concentrically in the cavity, as I said a poor attempt.

The proof house has offered the following information.
Prooved with 740gr Fosbery type slug, Max pressure 740 Bar.

Ofcourse the did not offer any feedback on how it shot or the nominal bore of the slug, and as it was 30% overloaded I would not have expected it to regulate.

Yes lots to do before the adventure can begin.

Nitro

PS: I have all the DGJ's so I will be doing some research through the index's.

Last edited by nitro450exp; 08/11/17 04:12 AM.